How to Recover Zong & Telenor E8372h-153 & 608 Dead Devices

How to Recover Zong & Telenor E8372h-153 & 608 Dead Devices

If you own a Zong or Telenor E8372h-153 or 608 device and it suddenly stops working or becomes unresponsive, don’t panic. There are several methods to recover your dead device and get it back up and running.

Before proceeding with any of the methods explained below, it is essential to understand that you might lose all your data, including settings and configurations. Therefore, it is advisable to backup your device data before attempting any recovery method.

Method 1: Firmware Upgrade/Downgrade

One of the most effective methods to recover your dead Zong or Telenor E8372h-153 or 608 device is to upgrade or downgrade the firmware. This method requires the use of the device’s firmware update tool and a compatible firmware file.

To upgrade or downgrade the firmware, follow the steps below:

1. Download the firmware update tool and a compatible firmware file for your device from the manufacturer’s website.
2. Connect your device to your computer using a USB cable.
3. Launch the firmware update tool and follow the on-screen instructions to upgrade or downgrade the firmware.

Method 2: Reset the Device

If your device is unresponsive or stuck in a boot loop, resetting the device might help. To reset the device, follow the steps below:

1. Locate the reset button on your device. The reset button is usually located on the back or bottom of the device.
2. Using a small pin or paper clip, press and hold the reset button for 10-15 seconds.
3. Release the reset button and wait for the device to reboot.

Method 3: JTAG Programming

JTAG programming is a more advanced method to recover a dead Zong or Telenor E8372h-153 or 608 device. This method requires specialized equipment and software to program the device’s flash memory.

To perform JTAG programming, follow the steps below:

1. Obtain a JTAG programming tool and software.
2. Connect the JTAG programming tool to your device’s JTAG port.
3. Launch the JTAG programming software and follow the on-screen instructions to program the device’s flash memory.

In conclusion, recovering a dead Zong or Telenor E8372h-153 or 608 device is possible using the methods explained above. It is essential to backup your device data before attempting any recovery method, as you might lose all your data, including settings and configurations. If you are not comfortable performing any of the methods explained above, seek professional help.

Supported Versions ZONG E8372h-153 Device:
E8372h-153 (21.313.11.00.306)
E8372h -153 (21.328.62.00.306)
E8372h -153 (21.323.01.00.306)
E8372h -153 (21.321.01.00.306)
E8372h -153 (21.318.01.01.306)
E8372h -153 (21.318.62.00.306)
E8372h -153 (21.323.01.01.274)
E8372h -153 (21.324.62.01.274)
E8372h -153 (21.325.01.01.274)

And All Version instead of 1456 or 1460

Supported Version TELENOR E8372h-153 & 608 Device:

TELENOE E8372h-153 & 608 (21.313.11.00.306)
TELENOE E8372h-153 & 608 (21.328.62.00.306)
TELENOE E8372h-153 & 608 (21.323.01.00.306)
TELENOE E8372h-153 & 608 (21.321.01.00.306)
TELENOE E8372h-153 & 608 (21.318.01.01.306)
TELENOE E8372h-153 & 608 (21.318.62.00.306)
TELENOE E8372h-153 & 608 (21.323.01.01.274)
TELENOE E8372h-153 & 608 (21.324.62.01.274)
TELENOE E8372h-153 & 608 (21.325.01.01.274)

And All Version instead of 1456 or 1460

How to Recover Zong:
Unzip by using 7zip
install Huawei drivers from given folder
boot shot your device and connect with your PC/Laptop
Check device manager port will be show here
Now open Your ZONG file (If you are Recovering ZONG Device) through it password given in folder and wait for complete setup i will run boot loader and after that will start automatically Flashing kindly wait and watch.

After complete flash Run Webui file and after complete this Repair Your IMEI, Serail Wifi Name and password through given commands
How to Recover Telenor:
Download your required folder from below link & unzip by using 7zip
install Huawei drivers from given folder
boot shot your device and connect with your PC/Laptop
Check device manager port will be show here
Now open Your ZONG file (If you are Recovering Telenor Device) through it password given in folder and close it when FC port will shown in Device manager

Download